PBM-45-3 Profile Bender Manual 3 Driven Rolls – 1 Phase or 3-Phase

The PBM-45 Profile bender has 3 driven rolls on 45 mm shafts driven by a 1-Phase or a 3-Phase motor and comes with a standard set of section rolls that are configurable and are suitable for most bending applications of square or angular profiles. If you wish to bend round tubes or pipe, we have tools ready to go off the shelf for all common sizes such as 42.2 mm and 48.3 mm outside diameters along with many other sizes being readily available. If you are wanting to bend custom profiles all we need from you is either a drawing or a piece of the profile and we can quote your custom rolls.

The top roll is a driven roll and its position is adjusted with a fined threaded T-screw. The top roll position is controlled by up and down buttons and its position is displayed on a DRO allowing for the top roll to be accurately positioned thus producing accurate bends.

The Profile Bender Machine can be flipped 90 degrees backward onto its back pads to make larger and longer bending applications easier in the horizontal plane and the roll speed is controlled with a potentiometer. The direction of the rolls is controlled with an easy to use foot pedal pendant.

One of the most common machines in a manufacturing or fabrication facility is a machine called a Profile Bender.  A Profile Bender does exactly what it says, it bends profiles. This type of machine also has many other names that descend directly from the overall versatility of this type of machine.  Some common other names include Roll Bender, Profile Roller, Angle Roller, Section Roll, Ring Roller, Ring Bender, Ring Roll Bender, Section Bending Machines, Section Bender,

Please contact for prices

Product Enquiry